OT FIT 18/220...240/450 CS PC
Avantages produits
- Compatible avec les variateurs de début et de fin de phase les plus courants
- Flexible current setting (DIPswitch 2 to 4 currents)
- Gradation sans scintillement
- Housing from 80% recycled plastic
Domaines d'application
- Éclairage décoratif
- Downlights, luminaires plats
- Accueil
- Séjours
- Bureaux
- Éclairage de commerces
- Adapté aux installations SELV en intérieur
Données techniques
Données électriques
Tension nominale
220 240 V
Fréquence du réseau
50/60 Hz
Tension à l'entrée
198 264 V
Total harmonic distortion
< 20 %
Facteur de puissance λ
090C 095
Efficiency in full-load
> 82 %
Puissance dissipée
4,0 W
Courant conducteur de protection
<0,7 mA
Courant d'appel
< 10 A
Nbre max. de BE sur disjoncteur 10 A
33
Nbre max. de BE sur disjoncteur 10 A
55
Nombre max des ECG sur disjoncteur 16A
88
Nombre max des ECG sur disjoncteur 16A
53
Nombre max des ECG sur disjoncteur 25A
-
Tension max. entre Phase/Neutre et Terre
2 kV
Tension maximum entre Phase/Neutre
1 kV
Tension de sortie
27 40 V
U-OUT
60 V
Courant de sortie
225 / 325 / 350 / 450 mA
Output current tolerance
±7.5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Puissance de sortie
18 W
Maximum output power
18 W
Current set
DipSwitch
Isolation galvan. entre second. et prim.
SELV
Default output current
450 mA
Dimensions & poids
Section du câble au primaire
0,75 1,5 mm²
Section du câble au secondaire
0,75 1,5 mm²
Longueur à dénuder, côté primaire
5 6 mm
Longueur à dénuder, côté secondaire
5 6 mm
Longueur
NaN mm
Largeur
NaN mm
Couleurs & matériaux
Matériau du boîtier
Plastique
Température
Plage de température ambiante
-20 +50 °C
Température maximale au point de test
80 °C
Temp. max. admissible en cas d'anomalie
110 °C
Plage de température de stockage
-20 80 °C
Humidité relative
5 85 %
Durée de vie
Vie ECG
30000 / 50000 h
Capacités
Gradateur
Coupure de phase
Plage de gradation
5 100 %
Variateur
Amplitude Modulation
protection contre la surchauffe
Automatique et réversible
Protection contre la surcharge
Automatique et réversible
Protection contre les courts-circuits
Automatique et réversible
Charge à vide
Oui
Intended for no-load operation
Non
Longueur max. entre ballast et lampe
2,0 m
Pour appareil avec classe de protec
I / II
Type de raccordement, côté entrée
Bornier à pression avec poussoir
Type de raccordement, côté sortie
Bornier à pression avec poussoir
Number of channels
1
Convient pour câblage traversant
Non
Programming
Programming device
DIPswitch
Certificats & Normes
Labels et agréments
CE / CCC / ENEC / EAC / RCM
Normes
Conformément à IEC 61347-1/Conformément à IEC 61347-2-13/Conformément à IEC 62384/Conformément à CISPR 15/Conformément à IEC 61000-3-2/Conformément à IEC 61000-3-3/Conformément à IEC 61547
Classe de protection
I,II
Type de protection
IP20
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
26-04-2024
Declaration No. in SCIP database
In work
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172007559 |
UNV
| 1 | 95mm x 50mm x 22mm | 78.00g | 0.10dm³ |
4062172007566 |
VS
| 20 | 264mm x 202mm x 64mm | 1555.00g | 3.41dm³ |
Téléchargements
En savoir plus sur la famille de produits
Caractéristiques produit
- Boîtier serre-câble pour le montage indépendant
- Gradable en début et en fin de phase
- Immobilier pour une installation indépendante
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT FIT 7/220...240/180 CS PC
|
27 40 V | 100 / 120 / 155 / 180 mA | 1300 mm | 300 mm | 222 mm | |||
OT FIT 8/220...240/180 CS PC SC
|
27 40 V | 100 / 120 / 155 / 180 mA | 950 mm | 500 mm | 220 mm | |||
OT FIT 14/220...240/350 CS PC
|
27 40 V | 200 / 250 / 300 / 350 mA | 1300 mm | 300 mm | 222 mm | |||
OT FIT 18/220...240/450 CS PC
|
27 40 V | 225 / 325 / 350 / 450 mA | NaN mm | NaN mm | ||||
OT FIT 18/220...240/450 CS PC SC
|
27 40 V | 225 / 325 / 350 / 450 mA | 950 mm | 500 mm | 220 mm | |||
OT FIT 30/220
240/700 CS PC
|
27 40 V | 500 / 700 mA | 950 mm | 530 mm | 300 mm | |||
OT FIT 40/220...240/1A0 CS PC
|
27 40 V | 800 / 900 / 950 / 1050 mA | 1080 mm | 670 mm | 220 mm | |||
OT FIT 40/220...240/1A0 CS PC SC
|
27 40 V | 800 / 900 / 950 / 1050 mA | 1080 mm | 670 mm | 220 mm |