OT FIT 14/220...240/350 CS PC
- Compatible avec les variateurs de début et de fin de phase les plus courants
- Flexible current setting (DIPswitch 2 to 4 currents)
- Gradation sans scintillement
- Housing from 80% recycled plastic
- Éclairage décoratif
- Downlights, luminaires plats
- Accueil
- Séjours
- Bureaux
- Éclairage de commerces
- Adapté aux installations SELV en intérieur
Données techniques
Données électriques
Tension nominale
220 240 V
Fréquence du réseau
50/60 Hz
Tension à l'entrée
198 264 V
Total harmonic distortion
< 20 %
Facteur de puissance λ
090C 095
Efficiency in full-load
81 %
Puissance dissipée
3,5 W
Courant conducteur de protection
<0,7 mA
Courant d'appel
< 10 A
Nbre max. de BE sur disjoncteur 10 A
132
Nbre max. de BE sur disjoncteur 10 A
80
Nombre max des ECG sur disjoncteur 16A
212
Nombre max des ECG sur disjoncteur 16A
128
Tension max. entre Phase/Neutre et Terre
2 kV
Tension maximum entre Phase/Neutre
1 kV
Tension de sortie
27 40 V
U-OUT
60 V
Courant de sortie
200 / 250 / 300 / 350 mA
Output current tolerance
±7.5 %
Output ripple current (100 Hz)
< 5 %
Output PSTLM
≤1
Output SVM
≤0.4
Puissance de sortie
5.4 14 W
Maximum output power
14 W
Default output current
350 mA
Isolation galvan. entre second. et prim.
SELV
Current set
DipSwitch
Dimensions & poids
Poids du produit
6000 g
Section du câble au primaire
0,75 1,5 mm²
Section du câble au secondaire
0,75 1,5 mm²
Longueur à dénuder, côté primaire
8,0 9,0 mm
Longueur à dénuder, côté secondaire
8,0 9,0 mm
Hauteur
222 mm
Longueur
1300 mm
Largeur
300 mm
Couleurs & matériaux
Matériau du boîtier
80% recycled plastic
Température
Plage de température ambiante
-20 +50 °C
Température maximale au point de test
70 °C
Temp. max. admissible en cas d'anomalie
110 °C
Plage de température de stockage
-40 +85 °C
Humidité relative
5 85 %
Durée de vie
Vie ECG
35000 / 50000 h
Capacités
Gradable
Oui
Gradateur
Coupure de phase
Plage de gradation
5 100 %
Variateur
Amplitude Modulation
protection contre la surchauffe
Automatique et réversible
Protection contre la surcharge
Automatique et réversible
Protection contre les courts-circuits
Automatique et réversible
Charge à vide
Oui
Longueur max. entre ballast et lampe
2,0 m
Pour appareil avec classe de protec
I / II
Type de raccordement, côté entrée
Bornier à pression avec poussoir
Type de raccordement, côté sortie
Bornier à pression avec poussoir
Number of channels
1
Convient pour câblage traversant
Non
Programming
Programming device
DIPswitch
Certificats & Normes
Labels et agréments
CCC / CE / UKCA / ENEC
Normes
Conformément à IEC 61347-1/Conformément à IEC 61347-2-13/Conformément à IEC 62384/Conformément à IEC 61000-3-2/Conformément à IEC 61547/Conformément à IEC 61000-3-3
Classe de protection
I,II
Type de protection
IP20
Données logistiques
Nomenclature douanière
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
29-05-2023
Primary Article Identifier
4062172286503
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
83c6f964-d691-408d-998d-5b1daf285163
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172286503 |
UNV
| 1 | 130mm x 30mm x 22mm | 60.00g | 0.09dm³ |
4062172286510 |
VS
| 20 | 396mm x 162mm x 67mm | 1365.00g | 4.30dm³ |
Téléchargements
En savoir plus sur la famille de produits
- Boîtier serre-câble pour le montage indépendant
- Gradable en début et en fin de phase
- Immobilier pour une installation indépendante
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT FIT 7/220...240/180 CS PC
|
27 40 V | 100 / 120 / 155 / 180 mA | 1300 mm | 300 mm | 222 mm | |||
OT FIT 8/220...240/180 CS PC SC
|
27 40 V | 100 / 120 / 155 / 180 mA | 950 mm | 500 mm | 220 mm | |||
OT FIT 14/220...240/350 CS PC
|
27 40 V | 200 / 250 / 300 / 350 mA | 1300 mm | 300 mm | 222 mm | |||
OT FIT 18/220...240/450 CS PC
|
27 40 V | 225 / 325 / 350 / 450 mA | NaN mm | NaN mm | ||||
OT FIT 18/220...240/450 CS PC SC
|
27 40 V | 225 / 325 / 350 / 450 mA | 950 mm | 500 mm | 220 mm | |||
OT FIT 30/220
240/700 CS PC
|
27 40 V | 500 / 700 mA | 950 mm | 530 mm | 300 mm | |||
OT FIT 40/220...240/1A0 CS PC
|
27 40 V | 800 / 900 / 950 / 1050 mA | 1080 mm | 670 mm | 220 mm | |||
OT FIT 40/220...240/1A0 CS PC SC
|
27 40 V | 800 / 900 / 950 / 1050 mA | 1080 mm | 670 mm | 220 mm |