TF400RGB-G1-05
Avantages produits
- Couleur changeante homogène
- Montage facile sur de nombreuses surfaces lisses grâce à une bande autocollante située au dos
Domaines d'application
- Éclairage d'effets en architecture
Technique / Accessoires
- Raccordement simplifié grâce au système dappariement optionnel CONNECTsystem
Données techniques
Données électriques
Tension nominale
240 V
Type de courant
Courant direct (DC)
Puissance nominale
4850 W
Plage de tension
23 25 V
Accidental reverse input voltage protection up to
25 V
Données photométriques
Couleur de la LED
RVB
Efficacité lumineuse
333 lm/W
Teinte de couleur (désignation)
Rouge/Vert/Bleu
Flux lumineux par mètre
380 lm
Dimensions & poids
Longueur
50000 mm
Poids du produit
6500 g
Largeur
800 mm
Hauteur
150 mm
Section du câble au primaire
0,5 mm²
Température
Plage de température au point Tc
-25 80 °C
Plage de température de stockage
-30 85 °C
Donnée produit supplémentaire
ID of contained light source [AGGR]
LS_SHZ_600468
Certificats & Normes
Energy efficiency class of the contained light source
G
Données logistiques
Nomenclature douanière
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
07-07-2023
Primary Article Identifier
4062172154284
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
610b9928-cf09-4dc4-9282-a76db081ba4d
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172154284 |
BT
| 1 | 215mm x 210mm x 11mm | 96.00g | 0.50dm³ |
4062172154291 |
VS
| 10 | 225mm x 240mm x 120mm | 1304.00g | 6.48dm³ |
Téléchargements
Accessoires optionnels
En savoir plus sur la famille de produits
Caractéristiques produit
- Bande de LED flexible et sécable
- Up to 50,000 hrs lifetime @ tc max
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015. The contained light source is intended for use in applications requiring high-quality coloured light.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
Données | ||
---|---|---|---|---|
TF400RGB-G1-05
|
380 lm |