OPTOTRONIC FIT D CS L (Dip Switch) EL
Caractéristiques produit
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
- Tension d'alimentation : 220 à 240 V,
- Tension de ligne : 198 à 264 V,
- Wide output current range
- Durée de vie : jusquà 100 000 h (température de T = 65 °C, taux de défaillance de 10 % maximum)
Avantages produits
- Flexible current setting (DIPswitch 6 currents)
- Qualité de lumière supérieure grâce au faible courant d'ondulation
- User flexibility with six different output currents from one driver
- Exigence en matière de sécurité en raison de la protection contre les surcharges, les surchauffes et les courts-circuits
- Longue durée de vie fiable aux températures maximum autorisées
- Enable slim fixture design with flat 21 mm height metal housing
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT FIT 18/220
240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 40/220
240/350 D CS L
|
40 120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 2100 mm | 300 mm | 210 mm | |||
OT FIT 60/220
240/350 D CS L
|
90 175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 75/220...240/550 D CS L
|
90 216 / 90 188 / 90 167 / 90 150 / 90 136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 2100 mm | 300 mm | 210 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Convient aux luminaires de classe de protection I
- Installation dans des systèmes déclairage de secours conformément à IEC 61347-2-13, annexe J
- Adapté aux installations dans des systèmes déclairage de secours selon la norme EN 60598-2-22
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.