LF1200-G3-930-09 L2
.jpg)
.jpg)
Avantages produits
- Color uniformity better than 2 SDCM on the entire LED strip and between strips
- Grande sélection de teintes de couleur
- Montage facile sur de nombreuses surfaces lisses grâce à une bande autocollante située au dos
Domaines d'application
- Éclairage de voûtes
- Intégration dans plafond
Technique / Accessoires
- Raccordement simplifié grâce au système d’appariement optionnel CONNECTsystem
- Installation rapide avec le système optionnel SLIM TRACK
- Parfaitement adapté aux ballasts électroniques OPTOTRONIC 24 V
Données techniques
Données électriques
Tension nominale
240 V
Type de courant
Courant direct (DC)
Puissance nominale par mètre
10,6 W
Puissance nominale
9570 W
Plage de tension
23…25 V
Accidental reverse input voltage protection up to
25 V
Données photométriques
Couleur de la LED
Blanc
Ra Indice de rendu des couleurs
>90
Flux lumineux par mètre
1200 lm
Efficacité lumineuse
113 lm/W
Teinte de couleur (désignation)
3000 K
Temp. de couleur
3000 K
Données photométriques
LED pitch
14.29 mm
Angle de rayonnement
120 °
Information module de LED
Nombre de LED par mètre
70
Nombre de LED par composant
7
Dimensions & poids
Longueur
90000 mm
Longueur – composant seul
100,0 mm
Longueur de câble
5000
Poids du produit
13100 g
Section du câble au primaire
0.51 mm²
Largeur
800 mm
Hauteur
140 mm
Température
T° fonctionnement conft norme IEC 62717
45 °C
Plage de température au point Tc
-20…90 °C
Plage de température ambiante
-20…+50 °C
Plage de température de stockage
-40…80 °C
Durée de vie
Durée de vie
60000 h
Durée de vie nominale
60000 h
Donnée produit supplémentaire
Code EAN de remplacement
4052899953338
ID of contained light source [AGGR]
LS_TRV_216762
Capacités
Lowest bending radius
20 mm
Certificats & Normes
Normes
CE; ENEC 10 VDE/EAC/UL Recognized component according UL 8750
Type de protection
IP00
Energy efficiency class of the contained light source
F
Données logistiques
Nomenclature douanière
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
19-05-2023
Primary Article Identifier
4062172142717
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
32844fed-0704-4586-8405-578904e4b19a
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
|---|---|---|---|---|---|
| 4062172142717 |
FS
| 1 | 186mm x 190mm x 29mm | 224.00g | 1.02dm³ |
| 4062172142724 |
VS
| 8 | 241mm x 195mm x 205mm | 1981.00g | 9.63dm³ |
Téléchargements
Données
Accessoires optionnels
En savoir plus sur la famille de produits
Caractéristiques produit
- Bande de LED flexible et sécable
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
| Nom du produit |
|
|
|
Données | ||
|---|---|---|---|---|---|---|
|
|
LF1200-G3-927-09 L2
|
>90 | 1100 lm | |||
|
|
LF1200-G3-824-09 L2
|
>80 | 1200 lm | |||
|
|
LF1200-G3-827-09 L2
|
>80 | 1200 lm | |||
|
|
LF1200-G3-830-09 L2
|
>80 | 1200 lm | |||
|
|
LF1200-G3-840-09 L2
|
>80 | 1200 lm | |||
|
|
LF1200-G3-930-09 L2
|
>90 | 1200 lm | |||
|
|
LF1200-G3-940-09 L2
|
>90 | 1200 lm | |||
|
LF2000-G3-927-04 L1
|
>90 | 1800 lm | |||
|
|
LF2000-G3-824-04 L1
|
>80 | 2000 lm | |||
|
|
LF2000-G3-827-04 L1
|
>80 | 2000 lm | |||
|
|
LF2000-G3-830-04 L1
|
>80 | 2000 lm | |||
|
|
LF2000-G3-840-04 L1
|
>80 | 2000 lm | |||
|
|
LF2000-G3-930-04 L1
|
>90 | 2000 lm | |||
|
|
LF2000-G3-940-04 L1
|
>90 | 2000 lm | |||
|
|
LF3000-G3-927-03 L1
|
>90 | 2800 lm | |||
|
|
LF3000-G3-824-03 L1
|
>80 | 3000 lm | |||
|
|
LF3000-G3-827-03 L1
|
>80 | 3000 lm | |||
|
|
LF3000-G3-830-03 L1
|
>80 | 3000 lm | |||
|
|
LF3000-G3-930-03 L1
|
>90 | 3000 lm | |||
|
|
LF3000-G3-940-03 L1
|
>90 | 3100 lm | |||
|
|
LF4000-G3-827-03 L1
|
>80 | 2700 K | 3750 lm | ||
|
|
LF4000-G3-830-03 L1
|
>80 | 3000 K | 3750 lm | ||
|
|
LF4000-G3-840-03 L1
|
>80 | 4000 K | 3850 lm |