ICUTRONIC DALI CS
Caractéristiques produit
- Tension d'alimentation : 220 à 240 V,
- Tension de ligne : 198 à 264 V,
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
Avantages produits
- Safety ensured by OSRAM (SELV)
- DALI-2 certified
- Touch DIM application: easy to control via pushbutton or sensor
- Easy to use in corridors and restrooms because of three-level Corridor function
- Qualité de lumière supérieure grâce au faible courant d'ondulation
- Housing from 80% recycled plastic
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
IT DALI 12/220
240/300 CS
|
9 42 V | 90 / 100 / 120 / 150 / 180 / 200 / 250 / 300 mA | 1300 mm | 300 mm | 222 mm | |||
IT DALI 30/220
240/700 CS
|
15 42 V | 350 / 400 / 450 / 500 / 550 / 600 / 650 / 700 mA | 970 mm | 430 mm | 295 mm | |||
IT DALI 42/220
240/1A0 CS
|
15 42 V | 700 / 750 / 800 / 850 / 900 / 950 / 1000 / 1050 mA | 970 mm | 430 mm | 295 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Bureaux
- Shops
- Accueil
- Panels, spotlight, downlight, and other indoor LED luminaires
- Adapté aux installations équivalentes SELV en intérieur
- Convient aux luminaires de classes de protection I et II
- Installation dans des systèmes déclairage de secours conformément à IEC 61347-2-3, annexe J
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.