LF800S-G5-825-10 L2
Avantages produits
- Color uniformity better than 2 SDCM on the entire LED strip and between strips
- Light stability over time typically 1 SDCM, tested acc. to IEC 62717 @ 6,000 h
- LED lifetime acc.to IES LM-80 and IES TM-21 standards, and also internal OSRAM LAB tests
- Reliable photometric parameters according to IES LM-79, EN13032-4 and CIE S 025
- Accurate description of the color rendition of the light source acc. to IES TM-30-15
- Excellent robustness: single reel manufacturing technology (no solder joints on strip)
- Vibration-resistant for stationary installations acc. to IEC60068-2-6 and IEC60068-2-64
- Flicker and stroboscopic effect-free acc. to IEC TR 61547-1 and IEC TR 63158
- Tested by accredited Product Qualification Lab. ISO9001, ISO 17025, ACCREDIA, VDE
- Montage facile sur de nombreuses surfaces lisses grâce à une bande autocollante située au dos
Données techniques
Données électriques
Tension nominale
240 V
Type de courant
Courant direct (DC)
Puissance nominale par mètre
6,7 W
Puissance nominale
6710 W
Plage de tension
23 25 V
Accidental reverse input voltage protection up to
25 V
Données photométriques
Couleur de la LED
Blanc
Ra Indice de rendu des couleurs
80
Flux lumineux par mètre
800 lm
Total des flux lumineux utiles
8000 lm
Efficacité lumineuse
119 lm/W
Ecart-type de correspondance de couleur
≤3 sdcm
Teinte de couleur (désignation)
2500 K
Temp. de couleur
2500 K
Données photométriques
LED pitch
7.14 mm
Angle de rayonnement
120 °
Temps d'amorçage
< 05 s
Temps de préchauffage (60 %)
< 050 s
Information module de LED
Nombre de LED par mètre
140
Nombre de LED par composant
7
Dimensions & poids
Longueur
100000 mm
Longueur composant seul
50,0 mm
Longueur de câble
5000
Poids du produit
12300 g
Section du câble au primaire
0,5 mm²
Largeur
800 mm
Hauteur
140 mm
Température
T° fonctionnement conft norme IEC 62717
35 °C
Plage de température au point Tc
-30 85 °C
Plage de température ambiante
-30 +50 °C
Plage de température de stockage
-40 85 °C
Durée de vie
Durée de vie
60000 h
Durée de vie nominale
60000 h
Flux résiduel en fin de vie nominale
070
Nombre de cycles de commutation
15000
Donnée produit supplémentaire
Code EAN de remplacement
4052899575738
ID of contained light source [AGGR]
LS_TRV_285917
Capacités
Lowest bending radius
20 mm
Certificats & Normes
Consommation d'énergie
74 kWh/1000h
Normes
CE/ENEC/EAC/UL
Type de protection
IP00
Energy efficiency class of the contained light source
F
Données logistiques
Nomenclature douanière
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
16-06-2023
Primary Article Identifier
4062172169813
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
081c2846-2227-4d4f-8b4a-4851aa46fc56
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172169813 |
FS
| 1 | 186mm x 190mm x 29mm | 216.00g | 1.02dm³ |
4062172169820 |
VS
| 8 | 241mm x 195mm x 205mm | 1917.00g | 9.63dm³ |
Téléchargements
Accessoires optionnels
En savoir plus sur la famille de produits
Caractéristiques produit
- 24 V LED strips flexible and cuttable, 50 mm cut unit
- Available variants: 800 lm/m 1200 lm/m 2000 lm/m / CRI Ra: 95+ 90+ and 80+
- Up to 60,000 h L90/B10 with SDT technology, tested acc. to IEC 62717 on real LED strips
- Stable light flux over length: active constant current regulators (ICs), PWM safe
- Embedded automatic quick protection against accidental miswiring up to 25 V
- Fully PWM dimmable from zero up to 2.5 kHz, audible noise free, suitable for quite places
- Designed, engineered and manufactured and tested in Italy (ISO9001, ISO 17025, ACCREDIA, VDE)
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
Données | ||
---|---|---|---|---|
LF800S-G5-825-10 L2
|
80 | |||
LF800S-G5-827-10 L2
|
80 | |||
LF800S-G5-925-10 L2
|
90 | |||
LF800S-G5-927-10 L2
|
90 | |||
LF800S-G5-930-10 L2
|
90 | |||
LF800S-G5-940-10 L2
|
90 | |||
LF800S-G5-925R-10 L2
|
95 | |||
LF800S-G5-927R-10 L2
|
95 | |||
LF800S-G5-930R-10 L2
|
95 | |||
LF800S-G5-940R-10 L2
|
95 | |||
LF800S-G5-830-10 L2
|
80 | |||
LF800S-G5-840-10 L2
|
80 | |||
LF1200S-G5-825-10 L2
|
80 | |||
LF1200S-G5-827-10 L2
|
80 | |||
LF1200S-G5-830-10 L2
|
80 | |||
LF1200S-G5-840-10 L2
|
80 | |||
LF1200S-G5-925-10 L2
|
90 | |||
LF1200S-G5-927-10 L2
|
90 | |||
LF1200S-G5-930-10 L2
|
90 | |||
LF1200S-G5-940-10 L2
|
90 | |||
LF1200S-G5-925R-05 L1
|
95 | |||
LF1200S-G5-927R-05 L1
|
95 | |||
LF1200S-G5-930R-05 L1
|
95 | |||
LF1200S-G5-940R-05 L1
|
95 | |||
LF2000S-G5-825-05 L1
|
80 | |||
LF2000S-G5-827-05 L1
|
80 | |||
LF2000S-G5-830-05 L1
|
80 | |||
LF2000S-G5-840-05 L1
|
80 | |||
LF2000S-G5-925-05 L1
|
90 | |||
LF2000S-G5-927-05 L1
|
90 | |||
LF2000S-G5-930-05 L1
|
90 | |||
LF2000S-G5-940-05 L1
|
90 | |||
LF2000S-G5-925R-05 L1
|
95 | |||
LF2000S-G5-927R-05 L1
|
95 | |||
LF2000S-G5-930R-05 L1
|
95 | |||
LF2000S-G5-940R-05 L1
|
95 |