OTI BLE 80/220 240/24 1 4 CH
Données techniques
Données électriques
Tension nominale
220 240 V
Fréquence du réseau
50/60 Hz
Tension à l'entrée
198 264 V
Total harmonic distortion
< 5 %
Facteur de puissance λ
098
Efficiency in full-load
93 %
Puissance dissipée
-
Courant d'appel
48 A
Nbre max. de BE sur disjoncteur 10 A
7
Nbre max. de BE sur disjoncteur 10 A
7
Nombre max des ECG sur disjoncteur 16A
11
Nombre max des ECG sur disjoncteur 16A
11
Nombre max des ECG sur disjoncteur 25A
17
Tension max. entre Phase/Neutre et Terre
-
Tension maximum entre Phase/Neutre
1 kV
Tension de sortie
24 V
U-OUT
24,2 V
Puissance de sortie
80 W
Maximum output power
80 W
Galvanic isolation
SELV
Isolation galvan. entre second. et prim.
3,75 kV
Output ripple Voltage (100 Hz)
< 5 %
Tension admissible
176 276 V
Output PWM frequency
2k Hz
Dimensions & poids
Entraxe de fixation, longueur
303 mm
Poids du produit
19100 g
Section du câble au primaire
0,5 2,5 mm²
Section du câble au secondaire
0,2 1,5 mm²
Longueur à dénuder, côté primaire
6,0 mm
Longueur à dénuder, côté secondaire
5,0 mm
Entraxe de fixation, largeur
0 mm
Largeur
320 mm
Longueur
3460 mm
Hauteur
220 mm
Couleurs & matériaux
Matériau du boîtier
Plastique
Température
Plage de température ambiante
-20 +45 °C
Température maximale au point de test
80 °C
Temp. max. admissible en cas d'anomalie
110 °C
Plage de température de stockage
-40 +85 °C
Humidité relative
5 85 %
Durée de vie
Vie ECG
50000 h
Capacités
Gradable
Oui
Gradateur
Bluetooth CASAMBI
Plage de gradation
0.4 100 %
Variateur
Pulse Width Modulation
protection contre la surchauffe
Réversible
Protection contre la surcharge
Réversible
Protection contre les courts-circuits
Réversible
Charge à vide
Oui
Intended for no-load operation
Non
Pour appareil avec classe de protec
I / II
Type de raccordement, côté sortie
Bornier à vis
Number of channels
4
Certificats & Normes
Labels et agréments
VDE / RCM / EAC
Normes
CE/ENEC
Classe de protection
II
Type de protection
IP20
Données logistiques
Nomenclature douanière
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4062172046558
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
5833340c-6e4b-442a-9a3e-1b73ec585239
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172046558 |
UNV
| 1 | |||
4062172046565 |
VS
| 20 | 370mm x 170mm x 113mm | 3998.00g | 7.11dm³ |
Téléchargements
Accessoires optionnels
En savoir plus sur la famille de produits
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OTI BLE 80/220
240/24 1
4 CH
|
80 W | Oui | 3460 mm | 320 mm | 220 mm |