OPTOTRONIC Intelligent – DALI NFC TW
Caractéristiques produit
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
- Tension d'alimentation : 220 à 240 V,
- Usable as DT6 (2-channel) or DT8 (Tunable White) driver
Avantages produits
- Control of standard white or Tunable White light acc. DALI device type 8 (DT8)
Produits
| Nom du produit |
|
|
|
|
|
Données | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 15/220…240/1A0 NFC TW I
|
7,5…54 V | 150…1050 mA | 203,0 mm | 44,5 mm | 34,0 mm | ||
|
OTi DALI 25/220…240/700 NFC TW I
|
12…54 V | 180…700 mA | 203,0 mm | 44,5 mm | 34,0 mm | ||
|
|
OTi DALI 35/220...240/1A0 NFC TW
|
15…54 V | 350…1050 mA | 1350 mm | 750 mm | 250 mm | ||
|
OTi DALI 50/220...240/1A4 NFC TW
|
15…54 V | 600…1400 mA | 1350 mm | 750 mm | 250 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Salles de classe
- Salles de conférences
- Simulation de lumière du jour pour pièces sans fenêtre
- Installation dans des systèmes d’éclairage de secours conformément à IEC 61347-2-13, annexe J
- Adapté aux installations SELV en intérieur et en extérieur
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.