FX-SC08-G2-C2PF-IP54-0500

Avantages produits
  • Installation simple, ni outils, ni soudure nécessaires (CONNECTsystem)
  • Durée d'installation réduite (CONNECTsystem)
  • Peut être connecté à l'avant du module ou aux points de division (CONNECTsystem)
  • De faible profondeur (CONNECTsystem)

Données techniques

Dimensions & poids

Longueur

510,0 mm

Poids du produit

8,30 g

Largeur

15,7 mm

Hauteur

8,2 mm

Donnée produit supplémentaire

Code EAN de remplacement

4052899533516

Données logistiques

Nomenclature douanière

85444290900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

12-02-2022

Primary Article Identifier

4052899464889 | 4052899488236

Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

In work

Informations sur l’emballage

EAN

Unité

Pièce

Dimensions

Poids

Volume

4052899464889 UNV

Sans emballage individuel

1
4052899464896 FS2

Etui carton fermé

20 316mm x 246mm x 41mm 370.00g 3.19dm³
4052899464902 VS

Carton de regroupement

280 510mm x 340mm x 315mm 5897.00g 54.62dm³

Téléchargements

En savoir plus sur la famille de produits

Caractéristiques produit
  • Quick and easy installation
  • Compatible with TEC Flex
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Produits