P RF CLAS B 2.5 W/827 E14

Données techniques

Données électriques

Fréquence de fonctionnement

50…60 Hz

Puissance équivalente à une lampe

25 W

Intensité nominale

19 mA

Données photométriques

Teinte de couleur (désignation)

Warm White

Flux lumineux

250 lm

Données photométriques

Angle de rayonnement

300 °

Dimensions & poids

Longueur totale

100.00 mm

Poids du produit

16.00 g


Plage de température ambiante

-20…+40 °C

Durée de vie

Maintien du flux lumineux en fin de vie


Donnée produit supplémentaire

Teneur en mercure

0.0 mg

Sans mercure


Design / version


Élimination appropriée cft DEEE


Notes bas de page util. uniquem. produit

All technical parameters apply to the entire lamp | Due to the complex production process for light-emitting diodes, the typical values shown for the technical LED parameters are purely statistical values that do not necessarily match the actual technical parameters of each individual product, which can vary from the typical value | LED lamps contain several electronic components. Under unfavourable conditions these can lead to acoustic noise. In case of resonance even low noise can cause audible effect. Possible factors influencing this are the installation, the design of the lamp holder and the luminaire (acoustic resonance effect) as well as the dimmer or the transformer (harmonics or electronic resonance)

Certificats & Normes

Classe d'énergie efficace


Consommation d'énergie

3.00 kWh/1000h

Environmental information

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration


Primary Article Identifier

4058075287662 | 4058075590519

Declaration No. in SCIP database

In work

Informations sur l’emballage







4058075287662 FS

Etui carton fermé

4058075590519 FS

Etui carton fermé

1 39mm x 39mm x 109mm 25.00g 0.17dm³
4058075287679 VS

Carton de regroupement

10 205mm x 87mm x 123mm 348.00g 2.19dm³
4058075590526 VS

Carton de regroupement

10 205mm x 87mm x 123mm 298.00g 2.19dm³


En savoir plus sur la famille de produits

Ecodesign regulation information:
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.