OPTOTRONIC Intelligent – DALI NFC S
Caractéristiques produit
- Tension d'alimentation : 220 à 240 V,
- Fréquence de ligne : 0 Hz, 50 à 60 Hz
- Tension de ligne : 198 à 264 V,
- Sécurité selon la norme EN 61347-1, 61347-2-13, 62384
- Suppression RI : selon EN 55015/CISPR 15
- Immunité suivant EN 61547
Avantages produits
- Alimentation de fenêtre DALI polyvalente grâce à la flexibilité de sortie
- DALI-2 certified incl. Parts 251, 252, 253
Produits
| Nom du produit |
|
|
|
|
|
Données | ||
|---|---|---|---|---|---|---|---|---|
|
OTi DALI 10/220…240/700 NFC
|
2.5…45 V | 150…700 mA | 1240 mm | 310 mm | 210 mm | ||
|
OTi DALI 20/220...240/500 NFC S
|
20…50 V | 200…500 mA | 970 mm | 430 mm | 295 mm | ||
|
|
OTi DALI 30/220…240/700 NFC S
|
20…50 V | 350…700 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
OTi DALI 40/220...240/1A0 NFC S
|
20…50 V | 500…1050 mA | 970 mm | 430 mm | 295 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Adapté à une utilisation dans des luminaires avec courant de réglage flexible
- Installation dans des systèmes d’éclairage de secours conformément à IEC 61347-2-13, annexe J
- Adapté aux installations SELV en intérieur
- Convient aux luminaires de classes de protection I et II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.