OPTOTRONIC FIT NFC
Caractéristiques produit
- Output current range 150-1050 mA
- NFC Interface
- Low LF-ripple < 5%
Avantages produits
- Fast programming / current set via NFC*
Produits
| Nom du produit |
|
|
|
|
|
Données | ||
|---|---|---|---|---|---|---|---|---|
|
OT FIT 15/220-240/350 NFC
|
18…40 V | 150…350 mA | 970 mm | 430 mm | 295 mm | ||
|
OT FIT 25/220-240/700 NFC
|
18…40 V | 350…700 mA | 97,0 mm | 43,0 mm | 29,5 mm | ||
|
|
OT FIT 40/220-240/1A0 NFC
|
18…40 V | 700...1050 mA | 970 mm | 430 mm | 295 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Spot light and down light
- Bureaux
- Shops
- Accueil
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.