OPTOTRONIC FIT NFC L (SELV)
Caractéristiques produit
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
- Tension d'alimentation : 220 à 240 V,
- Disponible avec gamme de courants de sortie : jusqu'à 1 400 mA
Avantages produits
- Fulfilling SVM (≤ 0.4) and PsT (≤ 1.0) standards
Produits
| Nom du produit |
|
|
|
|
|
Données | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 25/220...240/500 NFC L
|
20…51 V | 170…500 mA | 280,0 mm | 30,0 mm | 21,0 mm | ||
|
|
OT FIT 35/220...240/700 NFC L
|
20…51 V | 250…700 mA | 280,0 mm | 30,0 mm | 21,0 mm | ||
|
|
OT FIT 75/220...240/1A4 NFC L
|
20…51 V | 600…1400 mA | 280,0 mm | 30,0 mm | 21,0 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Installation dans des systèmes d’éclairage de secours conformément à IEC 61347-2-13, annexe J
- Convient aux luminaires de classe de protection I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.