OPTOTRONIC FIT LT2 LP
Caractéristiques produit
- Tension d'alimentation : 220 à 240 V,
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
- Tension de ligne : 198 à 264 V,
- Sécurité selon la norme EN 61347-1, 61347-2-13, 62384
- Suppression RI : selon EN 55015
- Harmoniques respectant la norme EN 61000-3-2
- Immunité suivant EN 61547
- Durée de vie : jusqu’à 100 000 h (température de T = 65 °C, taux de défaillance de 10 % maximum)
- Connexion indépendante via bornes de dérivation (suivant version du produit)
Produits
| Nom du produit |
|
|
|
|
|
Données | ||
|---|---|---|---|---|---|---|---|---|
|
|
OT FIT 15/220…240/500 LT2 LP
|
15…50 V | 150…500 mA | 103,0 mm | 67,0 mm | 22,5 mm | ||
|
OT FIT 25/220…240/700 LT2 LP
|
15…50 V | 300…700 mA | 103,0 mm | 67,0 mm | 22,5 mm | ||
|
OT FIT 40/220…240/1A0 LT2 LP
|
15…50 V | 500…1050 mA | 103,0 mm | 67,0 mm | 22,5 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Installation dans des systèmes d’éclairage de secours conformément à IEC 61347-2-13, annexe J
- Adapté aux installations SELV en intérieur
- Convient aux luminaires de classes de protection I et II
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.