OPTOTRONIC FIT D NFC IND L
Caractéristiques produit
- Fréquence de ligne : 0 Hz | 50 Hz | 60 Hz
- Versatile scope of application due to output power range of up to 300 W
- Tension d'alimentation : 220 à 240 V,
- Available with output current range: up to 1,600 mA
Avantages produits
- Protection contre les surtensions : jusqu'à 4 kV (L-N) / 4 kV (L/N-PE)
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT FIT 75/220...240/550 D NFC IND L
|
64 300 V | 125 550 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 100/220
240/700 D NFC IND L
|
64 300 V | 200 700 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 150/220
240/1A0 D NFC IND L
|
64 300 V | 250 1000 mA | 360,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 300/220...240/1A6 D NFC IND L
|
60 300 V | 250...1550 mA | 360,0 mm | 46,0 mm | 28,0 mm |
En savoir plus sur la famille de produits
Domaines d'application
- Installation dans des systèmes déclairage de secours conformément à IEC 61347-2-13, annexe J
- Adapté aux installations dans des systèmes déclairage de secours selon la norme EN 60598-2-22
- Convient aux luminaires de classe de protection I
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.