LF4000TW-G3-827/865-02

Avantages produits
  • Color uniformity better than 3 SDCM on the entire LED strip and between strips
  • LED lifetime acc.to IES LM-80 and IES TM-21 standards, and also internal OSRAM LAB tests
  • Excellent robustness: single reel manufacturing technology (no solder joints on strip)
  • Montage facile sur de nombreuses surfaces lisses grâce à une bande autocollante située au dos
  • Design extraordinaire et matériaux de haute qualité
  • Pre-soldered wires
Domaines d'application
  • Éclairage de voûtes
  • Éclairage de commerces
  • Bureaux
Technique / Accessoires
  • Raccordement simplifié grâce au système d’appariement optionnel CONNECTsystem
484426_Tonne-de

Données techniques

Données électriques

Puissance nominale par mètre

36,8 W

Données photométriques

Temp. de couleur

2700…6500 K

Ra Indice de rendu des couleurs

>80

Flux lumineux par mètre

3800 lm

Efficacité lumineuse

103 lm/W

For white color

Ecart-type de correspondance de couleur

≤4 sdcm

Dimensions & poids

Largeur

8,0 mm

Poids du produit

25,00 g

Hauteur

1,45 mm

Longueur

2100 mm

Donnée produit supplémentaire

Code EAN de remplacement

4062172032605

Notes bas de page util. uniquem. produit

Modules perfectly matched to OSRAM OPTOTRONIC LED drivers (see relevant table)/Pour des données photométriques actuelles et des informations importantes sur la sécurité, l'installation et les applications, voir www.osram.com/led-systems./Tous les paramètres techniques s'appliquent au module entier. En raison de la complexité de la production des LED, les valeurs techniques indiquées sont des valeurs statistiques. Les valeurs réelles de chaque lampe peuvent différer de ces valeurs

Données logistiques

Nomenclature douanière

940540399000

Informations sur l’emballage

EAN

Unité

Pièce

Dimensions

Poids

Volume

4052899953260 FS

Etui carton fermé

1 107mm x 55mm x 25mm 1718.00g 0.15dm³
4052899954458 VS

Carton de regroupement

8 241mm x 195mm x 205mm 1133.00g 9.63dm³

Téléchargements

Outils en ligne

Flex Configurator
Flex Configurator
Use our free flex configurator tool to calculate your ideal lighting solution Try it out now

Accessoires optionnels

En savoir plus sur la famille de produits

Caractéristiques produit
  • 24 V LED strips flexible and cuttable
  • Up to 60,000 h L90/B10 with SDT technology, tested acc. to IEC 62717 on real LED strips
  • Adjustable color temp. via Tunable White: 2200…3500 K, 2500…4000 K, 2700…5700 K CRI90
  • Adjustable color temp. via Tunable White: 2200…3500 K, 2500…3500 K, 2700…6500 K CRI80
  • CRI80, CRI90 options available
  • Stable light flux over length: active constant current regulators (ICs), PWM safe
  • Embedded automatic quick protection against accidental miswiring up to 25 V
  • Fully PWM dimmable from zero up to 2.5 kHz, audible noise free, suitable for quite places
  • Designed, engineered and manufactured and tested in Italy (ISO9001, ISO 17025, ACCREDIA, VDE)
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Produits

Sort by:
Nom du produit
Temp. de couleur
Ra Indice de rendu des couleurs
Flux lumineux par mètre
Puissance nominale par mètre
Efficacité lumineuse
Données
LF3000TW-G1-827.865-03 L1
2700…6950 K >80 3000 lm 27.7 W 108 lm/W
LF2000TW-G1-827.865-04 L1
2700…6900 K >80 2000 lm 17,8 W 112 lm/W
LF1200TW-G1-827.865-09 L2
2700…6500 K >80 1200 lm 10,3 W 117 lm/W
LF4000TW-G3-827/865-02
2700…6500 K >80 3800 lm 36,8 W 103 lm/W
LF3000TW-G3-827/865-03
2700…6500 K >80 3000 lm 30,0 W 100 lm/W
LF2000TW-G3-827/865-04
2700…6500 K >80 2000 lm 18,5 W 108 lm/W
LF3400TW-G5-927.957-03 L1
2700…5700 K 90 3400 lm 30.2 W 113 lm/W
LF3400TW-G5-925.940-03 L1
2500…4000 K 90 3400 lm 32.4 W 105 lm/W
LF3400TW-G5-922.935-03 L1
2200...3500 K 90 3400 lm 34.7 W 98 lm/W
LF1100TW-G5-927.957-09 L2
2700…5700 K 90 1156 lm 9,8 W 118 lm/W
LF1100TW-G5-925.940-09 L2
2500…4000 K 90 1156 lm 10,4 W 111 lm/W
LF1100TW-G5-922.935-09 L2
2200...3500 K 90 1111 lm 10,9 W 102 lm/W