LINEARlight FLEX Colormix IP00
Caractéristiques produit
- Bande de LED flexible et sécable avec des LED RGB en ligne
Avantages produits
- Couleur changeante homogène
- Grande liberté de conception grâce à la flexibilité du module et à la possibilité de le découper
- Montage et connexion simples
- Montage facile sur de nombreuses surfaces lisses grâce à une bande autocollante située au dos
Technique / Accessoires
- Installation rapide avec le système optionnel SLIM TRACK
- Parfaitement adapté aux ballasts électroniques OPTOTRONIC 24 V
Produits
| Nom du produit |
|
|
|
Données | ||
|---|---|---|---|---|---|---|
|
LF1300RGBW-G1-922-05 L2
|
5929 lm | 90 | 1160 lm | ||
|
|
LF1300RGBW-G1-927-05 L2
|
6158 lm | 90 | 1205 lm | ||
|
|
LF1300RGBW-G1-930-05 L2
|
6209 lm | 90 | 1217 lm | ||
|
|
LF1300RGBW-G1-940-05 L2
|
6515 lm | 90 | 1275 lm | ||
|
|
LF1300RGBW-G1-965-05 L2
|
6337 lm | 90 | 1240 lm | ||
|
LF600RGB-G5-06-L1
|
3444 lm | 575 lm |
En savoir plus sur la famille de produits
Domaines d'application
- Éclairage d'effets en architecture
- Injection de lumière dans les présentoirs et guides lumineux de faible profondeur
- Effets dynamiques dans les zones publiques
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
- Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.