OT FIT 60/220-240/12 P
Avantages produits
- Champ dapplication varié grâce à une gamme de puissances de sortie allant jusquà 120 W
- Protection contre les surtensions : jusqu'à 3 kV (L-N) / 6 kV (L/N-PE)
Domaines d'application
- Adapté aux installations en intérieur et en extérieur
- Idéal pour le montage dans des espaces exigus
Données techniques
Données électriques
Tension nominale
220 240 V
Fréquence du réseau
50 60 Hz
Tension à l'entrée
198 264 V
Total harmonic distortion
< 5 %
Facteur de puissance λ
0,95
Efficiency in full-load
87 %
Puissance dissipée
8.6 W
Courant d'appel
45 A
Nbre max. de BE sur disjoncteur 10 A
6
Nbre max. de BE sur disjoncteur 10 A
14
Nombre max des ECG sur disjoncteur 16A
13
Nombre max des ECG sur disjoncteur 16A
23
Nombre max des ECG sur disjoncteur 25A
22
Tension maximum entre Phase/Neutre
6 kV
Tension de sortie
12,5 V
U-OUT
13 V
Puissance de sortie
60 W
Maximum output power
60 W
Galvanic isolation
SELV
Tension max. entre Phase/Neutre et Terre
6 kV
Output ripple Voltage (100 Hz)
< 3 %
Dimensions & poids
Entraxe de fixation, longueur
153 mm
Poids du produit
473,00 g
Section du câble au primaire
1,0 mm²
Section du câble au secondaire
1,0 mm²
Longueur à dénuder, côté primaire
60 mm
Longueur à dénuder, côté secondaire
10 mm
Longueur
157,0 mm
Largeur
53,0 mm
Hauteur
31,5 mm
Entraxe de fixation, largeur
27,0 mm
Couleurs & matériaux
Matériau du boîtier
Métal
Température
Plage de température ambiante
-40 +50 °C
Température maximale au point de test
80 °C
Temp. max. admissible en cas d'anomalie
-
Plage de température de stockage
-40 +85 °C
Humidité relative
5 85 %
Durée de vie
Vie ECG
50000 h
Donnée produit supplémentaire
Code EAN de remplacement
4008321790811
Capacités
Gradable
Non
protection contre la surchauffe
Automatique et réversible
Protection contre la surcharge
Automatique et réversible
Protection contre les courts-circuits
Automatique et réversible
Charge à vide
Oui
Intended for no-load operation
Non
Pour appareil avec classe de protec
I
Type de raccordement, côté entrée
Wires
Type de raccordement, côté sortie
Wires
Number of channels
1
Certificats & Normes
Labels et agréments
CE / CCC / ENEC / TISI / RCM
Normes
Conformément à EN 61347-1/Conformément à EN 61347-2-13/Conformément à EN 55015/Conformément à EN 61547/Conformément à EN 61000-3-2/Conformément à EN 61000-3-3/Conformément à EN 60598-1/Conformément à EN 62384
Classe de protection
I
Type de protection
IP66/IP67
Données logistiques
Nomenclature douanière
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-11-2023
Primary Article Identifier
4062172133487
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
1e137453-4bbb-4752-a12a-f0fd7442c94e
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4062172133487 |
UNV
| 1 | 157mm x 53mm x 32mm | 473.00g | 0.26dm³ |
4062172133494 |
VS
| 15 | 349mm x 224mm x 153mm | 7430.00g | 11.96dm³ |
Téléchargements
En savoir plus sur la famille de produits
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT FIT 60/220-240/12 P
|
60 W | Non | 157,0 mm | 53,0 mm | 31,5 mm | |||
OT FIT 150/220-240/12 P
|
150 W | Non | 202,0 mm | 53,0 mm | 31,5 mm | |||
OT FIT 300/220-240/12 P
|
300 W | Non | 266,0 mm | 83,0 mm | 39,5 mm |