OT 250/220 240/24 DIM P
Données techniques
Données électriques
Tension nominale
220 240 V
Fréquence du réseau
0 60 Hz
Tension à l'entrée
198 264 V
Total harmonic distortion
< 15 %
Facteur de puissance λ
0,95
Efficiency in full-load
92 %
Puissance dissipée
20 W
Courant d'appel
75 A
Nbre max. de BE sur disjoncteur 10 A
3
Nombre max des ECG sur disjoncteur 16A
8
Nombre max des ECG sur disjoncteur 25A
13
Tension max. entre Phase/Neutre et Terre
6 kV
Tension maximum entre Phase/Neutre
4 kV
Tension de sortie
24.2 V
U-OUT
30 V
Puissance de sortie
250 W
Maximum output power
250 W
Galvanic isolation
SELV
Isolation galvan. entre second. et prim.
3 kV
Tension admissible
176 276 V
Dimensions & poids
Entraxe de fixation, longueur
250,0 mm
Poids du produit
1340,00 g
Section du câble au primaire
1,0 mm²
Section du câble au secondaire
1,0 mm²
Longueur à dénuder, côté primaire
90 mm
Longueur à dénuder, côté secondaire
90 mm
Longueur câbles/conducteurs, entrée gradation
320 mm
Longueur câbles/conducteurs, au primaire
300 mm
Longueur câbles/conducteurs, au second.
300 mm
Hauteur
40,0 mm
Largeur
68,0 mm
Longueur
265,0 mm
Couleurs & matériaux
Matériau du boîtier
Métal
Température
Plage de température ambiante
-30 +55 °C
Température maximale au point de test
85 °C
Temp. max. admissible en cas d'anomalie
110 °C
Plage de température de stockage
-40 +85 °C
Humidité relative
5 85 %
Durée de vie
Vie ECG
50000 h
Donnée produit supplémentaire
Code EAN de remplacement
4008321981714
Capacités
Gradable
Oui
Gradateur
1 10 V
Plage de gradation
1 100 %
Variateur
Pulse Width Modulation
protection contre la surchauffe
Oui
Protection contre la surcharge
Oui
Protection contre les courts-circuits
Oui
Charge à vide
Oui
Intended for no-load operation
Non
Pour appareil avec classe de protec
I
Type de raccordement, côté sortie
Bornier de connexion (produit)
Number of channels
1
Certificats & Normes
Labels et agréments
ENEC / RCM / CCC / EAC
Normes
Conformément à EN 61347-1/Conformément à EN 61347-2-13/Conformément à EN 55015/Conformément à EN 61547/Conformément à EN 61000-3-2/Conformément à EN 61000-3-3/Conformément à EN 60598-1/Conformément à EN 62384
Classe de protection
I
Type de protection
IP66/IP67
Données logistiques
Nomenclature douanière
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4052899545908
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
6106517c-2d32-4662-a057-18d404237ee9
Informations sur l’emballage
EAN |
Unité |
Pièce |
Dimensions |
Poids |
Volume |
---|---|---|---|---|---|
4052899545908 |
FS
| 1 | 326mm x 88mm x 51mm | 1385.00g | 1.46dm³ |
4052899545915 |
VS
| 10 | 459mm x 344mm x 144mm | 14752.00g | 22.74dm³ |
Téléchargements
En savoir plus sur la famille de produits
Caractéristiques produit
- Fonctionnalité de mode DC
- Gradable via une interface 1 10 V entièrement isolée
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Produits
Nom du produit |
|
|
|
|
|
Données | ||
---|---|---|---|---|---|---|---|---|
OT 20/220
240/24 DIM P
|
20 W | Oui | 178,0 mm | 43,0 mm | 25,0 mm | |||
OT 40/220
240/24 DIM P
|
40 W | Oui | 208,0 mm | 43,0 mm | 26,0 mm | |||
OT 60/220
240/24 DIM P
|
60 W | Oui | 208,0 mm | 43,0 mm | 26,0 mm | |||
OT 100/220
240/24 DIM P
|
100 W | Oui | 240,0 mm | 50,0 mm | 34,0 mm | |||
OT 130/220
240/24 DIM P
|
130 W | Oui | 220,0 mm | 63,0 mm | 37,0 mm | |||
OT 250/220
240/24 DIM P
|
250 W | Oui | 265,0 mm | 68,0 mm | 40,0 mm |