BackLED XL Plus G3

Caractéristiques produit
  • Relié avec des câbles flexibles
  • Indice de rendu des couleurs Ra: > 80
  • Lumière blanche constante < 3 SDCM
Avantages produits
  • Éclairage uniforme pour les écartements entre LED élevés, grâce à la technologie Square Lens
  • Click and Play : intégration rapide et simple par encliquetage des modules de LED, aucun outil nécessaire
  • Garantie de 5 ans

Produits

Sort by:
Nom du produit
Temp. de couleur
Ra Indice de rendu des couleurs
Flux lumineux par module LED
Puissance nominale par module LED
Efficacité lumineuse
Données
BA-XL-PL 830 G3
3000 K ≥80 300 lm 2,2 W 135/130 lm/W
BA-XL-PL 840 G3
4000 K ≥80 305 lm 2,2 W 137/133,5 lm/W
BA-XL-PL 865 G3
6500 K ≥80 300 lm 2,2 W 135/130 lm/W

En savoir plus sur la famille de produits

Domaines d'application
  • Signalétique et enseignes lumineuses
  • Utilisation permanente en extérieur dans des caissons lumineux fermés

Références/Liens
For more information on the multi-level guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee

Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Téléchargements