ELEMENT 18/220…240/350 D CS L

Domaines d'application
  • Convient aux luminaires de classe de protection I

Données techniques

Données électriques

Tension nominale

220…240 V

Fréquence du réseau

50/60 Hz

Tension à l'entrée

198…264 V

Current set

DipSwitch

Facteur de puissance λ

0,95

Pleine charge à 230 V/50 Hz

Efficiency in full-load

88 %

at 230 V, 50 Hz

Puissance dissipée

2,4 W

A 230 V, la puissance à l'entrée: 20,9 W max

Courant d'appel

8,6 A

twidth = 126 μs typical (measured at 50 % Ipeak)

Nbre max. de BE sur disjoncteur 10 A

40

Nbre max. de BE sur disjoncteur 10 A

70

Nombre max des ECG sur disjoncteur 16A

70

Nombre max des ECG sur disjoncteur 16A

116

Tension max. entre Phase/Neutre et Terre

2 kV

Tension maximum entre Phase/Neutre

1 kV

Tension de sortie

25…54 V

Courant de sortie

200 / 250 / 300 / 350 mA

±5%

Output ripple current (100 Hz)

< 30 %

Output PSTLM

≤1

Output SVM

≤1.2

Puissance de sortie

5…18 W

Maximum output power

18 W

Default output current

350 mA

Galvanic isolation

Non isolated

U-OUT

< 250 V

Total harmonic distortion

< 20 %

Output current tolerance

±7.5 %

Dimensions & poids

Entraxe de fixation, longueur

200,0 mm

Poids du produit

102,00 g

Section du câble au primaire

0,5…1,5 / 0,75…1,5 mm²

Conducteurs souples et rigides

Section du câble au secondaire

0,5…1,5 / 0,75…1,5 mm²

Conducteurs souples et rigides

Longueur à dénuder, côté primaire

8,5…9,5 mm

Largeur

30,0 mm

Longueur à dénuder, côté secondaire

8,5…9,5 mm

Hauteur

21,0 mm

Longueur

210,0 mm

Couleurs & matériaux

Matériau du boîtier

Métal

Température

Plage de température ambiante

-20…+50 °C

Température maximale au point de test

75 °C

Temp. max. admissible en cas d'anomalie

110 °C

Plage de température de stockage

-25…85 °C

Humidité relative

5…85 %

Sans condensation

Durée de vie

Vie ECG

35000 / 50000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Temperature at the measuring point tc (°C)

75 °C

Capacités

Gradable

Non

protection contre la surchauffe

Automatique et réversible

Protection contre la surcharge

Automatique et réversible

Protection contre les courts-circuits

Automatique et réversible

Charge à vide

Oui

Intended for no-load operation

Non

Longueur max. entre ballast et lampe

2,0 m

Output wires must be routed as close as possible to each other

Pour appareil avec classe de protec

I

Number of channels

1

Programming

Programming device

DIPswitch

Certificats & Normes

Labels et agréments

CE / ENEC 05 / EAC / CCC / BIS / RCM

Normes

Conformément à IEC 61347-1/Conformément à IEC 61347-2-13/Conformément à IEC 62384/Conformément à IEC 61000-3-2/Conformément à IEC 61000-3-3/Conformément à IEC 61547

Type de protection

IP20

Données logistiques

Nomenclature douanière

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

21-07-2023

Primary Article Identifier

4052899553071

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

632bbc3b-6e47-4428-bcfe-ac098a7e3fce

Informations sur l’emballage

EAN

Unité

Pièce

Dimensions

Poids

Volume

4052899553071 UNV

Sans emballage individuel

1
4052899553088 VS

Carton de regroupement

20 228mm x 138mm x 160mm 2318.00g 5.03dm³

Téléchargements

En savoir plus sur la famille de produits

Caractéristiques produit
  • Fréquence de ligne : 50 Hz | 60 Hz
  • Tension d'alimentation : 220 à 240 V,
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Produits

Sort by:
Nom du produit
Tension de sortie
Courant de sortie
Longueur
Largeur
Hauteur
Données
ELEMENT 18/220…240/350 D CS L
25…54 V 200 / 250 / 300 / 350 mA 210,0 mm 30,0 mm 21,0 mm
ELEMENT 40/220…240/350 D CS L
55…120 V 200 / 250 / 300 / 350 mA 210,0 mm 30,0 mm 21,0 mm
ELEMENT 60/220…240/350 D CS L
90…175 V 200 / 250 / 300 / 350 mA 210,0 mm 30,0 mm 21,0 mm